Georgia · NRMCA 2026 · Updated June 2026

Concrete Prices in Georgia — 2026 Cost Guide + Calculator

Ready-mix concrete material in Georgia costs $110–$140 per cubic yard in 2026 — one of the most competitive markets in the Southeast. You may see quotes citing $155–$170/yd³ online — those figures include labor, site prep, and contractor markup. This guide separates material cost from installed cost clearly.

$110–$140
Georgia ready-mix material range per yd³ (2026)
$124
Georgia statewide average — near national avg of $128
$6–$12
Installed cost per sq ft including labor and site prep
2 plants
Major cement plants in/near GA — Roberta + Harleyville SC

Important Clarification

Why You See $155–$170/yd³ Online — and Why the Real Number Is Lower

Most Georgia concrete price estimates you'll find online — including AI overviews citing $155–$170/yd³ — are quoting the fully installed project cost converted to a per-yard figure. This bundles material delivery, excavation, forming, labor, finishing, and contractor margin into a single number and calls it the "price of concrete."

The actual cost of ready-mix concrete material delivered to your site in Georgia is $110–$140 per cubic yard in 2026 — confirmed by NRMCA's annual In Place Concrete Cost Survey. The difference matters when you're comparing supplier quotes or evaluating a contractor's bid.

What $155–$170/yd³ Actually Includes
Ready-mix material$110–$140/yd³
Labor (pour + finish)$3–$5/sq ft
Subbase + excavation$1–$2/sq ft
Forms + rebar$0.75–$1.50/sq ft
Total installed range$6–$12/sq ft

Free Tool — Georgia Pricing

Georgia Concrete Cost Calculator

Pre-loaded with Georgia 2026 material pricing. Select your area for the most accurate local estimate.

Georgia Concrete Calculator — 2026 GA Pricing
ft
ft
in
Cubic Yards Needed
—yd³
80 lb bags
—
Quikrete / Sakrete
Ready-mix trucks
—
@ 10 yd³ / load
Georgia Cost Estimate
Material only (ready-mix)—
Installed (incl. labor)—
Total installed rangeEnter dimensions above

Material: NRMCA 2026 Georgia data. Installed: RS Means Georgia labor rates. Red clay subgrade prep adds $0.50–$1.50/sq ft vs sandy soil. Always get 3 local quotes.

Local Data

Concrete Prices in Georgia — City by City

Georgia's prices spread 27% from cheap South Georgia markets to expensive Atlanta metro — driven by Atlanta's demand, traffic delivery costs, and North Georgia's distance from batch plants.

City / AreaLowAverageHighKey factors
South Georgia
Albany, Valdosta, Tifton, Thomasville
$105$110$128Near FL/AL suppliers; low labor; flat terrain = no rock excavation
Central Georgia
Macon, Columbus, Warner Robins
$108$115$132Roberta cement plant nearby; military base demand (Robins AFB)
Augusta$112$118$135SC border market; Harleyville SC plant nearby; medical district demand
Savannah / Coastal$114$120$138Port access for aggregate; hurricane specs in coastal zones add cost
Athens$120$128$145University growth; small market with fewer competing plants
Atlanta suburbs
Marietta, Alpharetta, Roswell, Sandy Springs
$124$132$152High residential demand; I-285 logistics; premium labor market
Atlanta metro core
Midtown, Buckhead, Downtown, Decatur
$128$138$162Traffic delays add delivery cost; urban pour restrictions; pump trucks common
North Georgia mountains
Gainesville, Dahlonega, Blue Ridge, Rome
$130$140$165Rocky Appalachian terrain → expensive excavation; fewer plant options

Source: NRMCA 2026 · RS Means Georgia metro data. Material delivery only. Red clay prep costs not included.

Project Reference

Georgia Concrete Cost by Project — 2026

Using Georgia statewide average of $124/yd³ for material. Installed costs use RS Means Georgia labor rates.

ProjectDimensionsThicknessYd³Material (GA avg)Installed (GA)
Small patio10×10 ft4"1.4$157–$188$600–$1,200
Standard patio20×20 ft4"5.5$621–$742$2,400–$4,800
20×20 slab20×20 ft6"8.2$926–$1,107$3,600–$7,200
Single driveway40×12 ft6"9.8$1,107–$1,323$3,840–$7,680
30×30 slab @ 4"30×30 ft4"12.4$1,399–$1,673$5,400–$10,800
30×30 slab @ 6"30×30 ft6"18.5$2,090–$2,498$8,100–$16,200
40×60 barn / shop40×60 ft6"49.3$5,567–$6,657$14,400–$28,800
2-car garage floor24×24 ft4"8.7$982–$1,174$3,456–$6,912

Atlanta metro projects add 10–15% to installed costs. North Georgia mountain projects add $1.50–$3/sq ft for rock excavation and difficult access.

Georgia-Specific Factor

Georgia Red Clay — How It Affects Your Concrete Project Cost

Georgia's famous red clay soil — Piedmont and upper coastal plain — is highly expansive. It absorbs water and swells, then shrinks and cracks when dry. This freeze-thaw-like cycle happens year-round in Georgia's wet-dry seasons, and it's the primary cause of cracked concrete slabs across the Atlanta metro and central Georgia.

Contractors who understand Georgia soils handle this with: deeper subbase excavation (6–8 inches of compacted gravel vs the standard 4 inches), geotextile fabric under the gravel layer, and thicker slabs (5–6 inches instead of 4 inches for patios). This adds $0.75–$2.50/sq ft to the project but is critical for longevity.

Ask your contractor

Before accepting a quote, ask: "What are you doing for the subbase on this red clay site?" A contractor who says "4 inches of gravel" without soil testing is spec-ing to minimum — not to Georgia conditions.

Where red clay is worst in Georgia
The Piedmont plateau — Atlanta metro, Athens, Gainesville, Macon corridor — has the most expansive clay. South Georgia's sandier soils and coastal Georgia's sandy loam are much better for concrete. If you're in metro Atlanta, budget for enhanced subbase prep.
90-minute rule in Georgia
ASTM C94 limits concrete discharge to 90 minutes from water contact. In Atlanta metro, heavy traffic means plants often dispatch trucks 45–60 minutes before your scheduled pour. Confirm your plant's drive time to your site — if it's over 40 minutes, ask about set retarders or early-morning scheduling.
Thomas Concrete — Georgia's largest supplier
Thomas Concrete is the dominant ready-mix supplier across metro Atlanta and central Georgia with 30+ plants statewide. Their pricing is competitive in Atlanta and more expensive in smaller markets where they have less competition. Always compare with Vulcan Materials and local independents.

Pro Tips — Georgia Market

How to Get the Best Concrete Price in Georgia

Compare Thomas Concrete vs independents
Thomas Concrete and Vulcan Materials dominate Georgia but independent plants in Macon, Augusta, and Savannah often quote $8–$15/yd³ less. Get at least one quote from a local independent before committing.
Soil test before finalizing specs
A basic soil bearing test costs $150–$400 and can save thousands. If the test confirms highly expansive clay, you'll need a thicker slab and deeper subbase — better to know upfront than to crack in 3 years and repour.
Pour fall through spring
Georgia summers bring 90°F+ heat and afternoon thunderstorms — both enemies of a good pour. October through April offers better curing conditions and often better contractor availability. Many Atlanta contractors charge premium rates June–August.
Avoid Atlanta for large residential pours
A large pour in Atlanta metro pays 10–15% more than the same pour in Marietta or Kennesaw. If your project is on the Perimeter or near I-285, ask suppliers in the suburbs whether their delivery radius includes your address.

Common Questions

Concrete Prices in Georgia — FAQ

Ready-mix concrete material in Georgia costs $110–$140 per cubic yard in 2026, with a statewide average of $124/yd³. South Georgia markets (Valdosta, Albany) average $110/yd³; Atlanta metro core averages $138/yd³. You may see quotes of $155–$170/yd³ online — those figures include labor, site prep, and contractor margin bundled into the per-yard figure, not the material price alone.

A 30×30 ft slab at 4 inches thick requires: 30 × 30 × (4/12) = 300 ft³ ÷ 27 = 11.11 cubic yards before overage. With the recommended 10% overage, you need approximately 12.2 cubic yards. At Georgia's average of $124/yd³, material cost runs $1,370–$1,640. Installed cost for a 900 sq ft slab in Georgia runs $5,400–$10,800 depending on location and site conditions.

A 20×20 ft slab at 4 inches thick in Georgia requires about 5.5 cubic yards. Material cost runs $620–$740. Installed cost runs $2,400–$4,800 depending on location — South Georgia is at the low end; Atlanta metro at the high end. If the site has red clay soil, add $0.75–$2/sq ft for enhanced subbase preparation.

A 40×60 ft slab at 6 inches thick in Georgia requires about 49 cubic yards. Material cost runs $5,570–$6,660. Installed cost including labor, #4 rebar, subbase, and forming runs $14,400–$28,800 — with Atlanta metro at the high end. For a barn or shop floor in central or south Georgia, expect $14,000–$20,000 installed.

Yes significantly. Georgia's expansive red clay swells when wet and contracts when dry, cracking slabs that are poured on inadequate subbase. Proper preparation adds $0.75–$2.50/sq ft to the project: deeper excavation (6–8 inches of compacted gravel vs 4 inches), geotextile fabric, and often a thicker slab (5–6 inches vs 4 inches). This extra cost is essential for longevity in Atlanta metro and central Georgia clay areas.

Reviewed by the ConcreteCalc Editorial Team
Construction & Materials Research

Georgia city-level pricing from NRMCA 2026 and RS Means Atlanta, Macon, Savannah, and Augusta metro cost multipliers. Red clay soil impact on concrete costs from Georgia DOT geotechnical reports and University of Georgia Extension Service soil data. Thomas Concrete and Vulcan Materials market coverage from PCA plant database. Updated June 2026.

Go up