Florida · NRMCA 2026 · Updated June 2026
Concrete Prices in Florida — 2026 Cost Guide + Calculator
Ready-mix concrete in Florida costs $112–$145 per cubic yard in 2026 — close to the national average, but with wide variation from Panhandle markets at $112 to South Florida (Miami/Keys) at $145+. Florida imports all its cement, which limits competition and keeps prices above the Midwest.
Quick Answer
How Much Does Concrete Cost in Florida?
Ready-mix concrete in Florida averages $126 per cubic yard in 2026 for material delivery — nearly identical to the national average of $128/yd³. However, fully installed costs run $5–$15/sq ft depending on project type and finish. South Florida (Miami, Fort Lauderdale, Keys) consistently runs 15–20% above Orlando and Tampa due to higher labor costs and longer supply chains.
Free Tool — Florida Pricing
Florida Concrete Cost Calculator
Pre-loaded with Florida 2026 regional pricing. Select your city or region for the most accurate local estimate.
Material: NRMCA 2026 Florida data. Installed: RS Means Florida labor rates. Humidity additives may add $3–$8/yd³ in South Florida. Always get 3 local quotes.
Local Data
Concrete Prices in Florida — City by City
Florida's prices vary 30% from Panhandle to Keys — driven by distance from aggregate sources, labor market, and coastal construction demand.
| City / Area | Low | Average | High | Key factors |
|---|---|---|---|---|
| Florida Panhandle Pensacola, Tallahassee, Panama City | $105 | $112 | $132 | Closest to SE supplier network; lowest labor in FL |
| Jacksonville | $110 | $118 | $138 | Port access for aggregate; moderate labor market |
| Orlando / Central FL Orlando, Kissimmee, Lakeland | $115 | $122 | $145 | High construction demand; theme park boom drives labor cost |
| Tampa / St. Petersburg | $118 | $124 | $148 | Active port; strong residential demand; hurricane hardening adds spec cost |
| Fort Myers / Naples | $122 | $130 | $155 | Post-Ian rebuilding demand still elevated in 2026; skilled labor premium |
| Miami / Fort Lauderdale | $128 | $138 | $168 | Highest labor cost in FL; dense urban logistics; salt air additives |
| West Palm Beach / Boca | $125 | $135 | $162 | South Florida labor market; high-end residential demand |
| Florida Keys | $138 | $145 | $180 | Island logistics premium; all material trucked from mainland; marine-grade spec required |
Source: NRMCA 2026 survey · RS Means Florida metro cost data. Material delivery only — excludes labor, forming, and finishing.
Project Reference
Florida Concrete Cost by Project Size — 2026
Using Florida statewide average of $126/yd³ for material. Installed costs use RS Means Florida labor rates.
| Project | Dimensions | Thickness | Yd³ | Material (FL) | Installed (FL) |
|---|---|---|---|---|---|
| Small patio | 10×10 ft | 4" | 1.4 | $160–$195 | $500–$1,500 |
| Standard patio | 20×20 ft | 4" | 5.5 | $630–$755 | $2,000–$6,000 |
| Single driveway | 40×12 ft | 6" | 9.8 | $1,125–$1,345 | $3,840–$8,640 |
| 2-car garage floor | 24×24 ft | 4" | 8.7 | $1,000–$1,195 | $2,880–$5,760 |
| 20×20 slab | 20×20 ft | 6" | 8.2 | $942–$1,125 | $3,000–$6,000 |
| 30×30 slab | 30×30 ft | 6" | 18.5 | $2,125–$2,540 | $6,750–$13,500 |
| 40×60 barn / shop | 40×60 ft | 6" | 49.3 | $5,665–$6,770 | $14,400–$28,800 |
| Pool deck | 500 sq ft | 4" | 6.9 | $793–$948 | $2,500–$7,500 |
Material at $112–$145/yd³ Florida range with 10% overage. South Florida projects add 15–20% to installed costs. Hurricane-resistant specs (higher PSI, epoxy-coated rebar) add $1–$3/sq ft.
Essential Knowledge
What Is the 20/30/40 Rule in Concrete — and Why It Matters in Florida
The 20/30/40 rule is a practical guideline used by Florida contractors for slab thickness based on load requirements:
- 20 MPa (≈2,900 PSI) — light residential: patios, walkways, pool decks
- 30 MPa (≈4,350 PSI) — standard residential: driveways, garage floors
- 40 MPa (≈5,800 PSI) — commercial and heavy load applications
In Florida, this rule is particularly important because the state's high water table and sandy soil require stronger concrete specs than equivalent Midwest projects. Miami-Dade County has its own wind-load building codes that push slab requirements toward the 30–40 MPa range even for residential driveways.
Market Analysis
Why Concrete Prices Vary So Much Across Florida
No in-state cement plants
Florida has zero Portland cement manufacturing plants. All cement is imported — primarily from Alabama, Georgia, and international sources through Jacksonville, Tampa, and Miami ports. This adds transport cost to every yard poured in the state.
North-south price gradient
The Panhandle sources aggregate from Georgia and Alabama at low transport cost. South Florida (Miami, Keys) is at the far end of the supply chain — adding $15–$30/yd³ in logistics cost vs the Panhandle for the same spec.
Post-Hurricane Ian demand (SW Florida)
Fort Myers, Cape Coral, and Naples saw massive reconstruction demand after Hurricane Ian (2022). Concrete prices in SW Florida remained elevated 15–20% above pre-Ian levels through 2026 due to sustained contractor and material demand.
Miami-Dade stricter codes
Miami-Dade and Broward counties have the strictest building codes in Florida due to hurricane risk. Higher PSI requirements, epoxy rebar, and mandatory wind load specs push material and labor costs 20–30% above Tampa or Orlando averages.
Pro Tips — Florida Market
How to Get the Best Concrete Price in Florida
Common Questions
Concrete Prices in Florida — FAQ
Ready-mix concrete in Florida costs $112–$145 per cubic yard in 2026, with a statewide average of $126/yd³. The Panhandle (Pensacola, Tallahassee) is cheapest at $112/yd³ average; the Florida Keys are most expensive at $145/yd³. Fully installed including labor, forming, and subbase runs $5–$15 per square foot depending on project type and location.
The 20/30/40 rule refers to concrete strength specifications in MPa (megapascals): 20 MPa (≈2,900 PSI) for light residential like patios and walkways, 30 MPa (≈4,350 PSI) for driveways and garage floors, and 40 MPa (≈5,800 PSI) for commercial and heavy-load applications. In Florida, the state's sandy soil and hurricane exposure push most residential contractors toward the 30 MPa spec even for standard projects.
A 40×60 ft concrete slab at 6 inches thick in Florida requires about 49 cubic yards. Material cost runs $5,665–$6,770 at Florida pricing. Installed cost including labor, #4 rebar, subbase, and forming typically runs $14,400–$28,800 — with South Florida (Miami/Fort Lauderdale) at the high end due to labor costs and hurricane-resistant specs.
Miami concrete costs 13–20% more than Orlando for three reasons: (1) Miami-Dade and Broward building codes require higher PSI and epoxy-coated rebar for hurricane resistance, adding $1–$2.50/sq ft in material cost. (2) South Florida labor rates are 15–25% above Orlando. (3) Miami is at the far end of Florida's supply chain — aggregate travels 300+ miles from north Florida and Georgia. Orlando sits in the geographic middle of the state with better supplier access.
Yes — Florida's 80%+ humidity in South Florida slows surface drying while the interior cures normally, increasing cracking risk. Contractors use curing compounds ($0.15–$0.25/sq ft) and extend finishing time, adding labor cost. Coastal projects within 1 mile of salt water also require corrosion-resistant reinforcement (epoxy rebar or fiber), adding $0.75–$2.50/sq ft above standard inland specs.
Florida city-level pricing from NRMCA 2026 survey and RS Means metro cost multipliers for Miami, Orlando, Tampa, Jacksonville, and Fort Myers. Hurricane-resistant spec costs from Miami-Dade Building Code requirements. Post-Ian pricing data from FEMA construction cost reports. Humidity curing guidance from ACI 308R. Updated June 2026.